Ad Owner
Burak üneş Membership Date: 06 February 2021 |
---|
Mobile Telephone: +905330319925 |
Ask The Owner Of The Ad |
All ads from this seller |
Ultimaker clone 3D printer
12v transformer
A4988 driver board and motor drivers
I used an external MOSFET card to avoid load on the motherboard.
12 shaft was used, shakes were eliminated
There is a spigot and a magnetic plate on it is worth 100 TL
Since the transformer is 40 amps, not 20 or 30, it provides fast heating.
Aluminum table, not pcb table
Engines are new. nema17
Head flare 260
Bed 90-100
20x20x30 printing area.
All parts are new. If you only try to buy the parts, it is already more than 2500 TL
It is immaculate, there is no problem.